西克sick傳感器在日常使用中需要注意哪些方面呢？
西克sick傳感器在日常使用中需要注意哪些方面呢？
在使用UE410 flexi modular safety controller或受UE410 flexi modular safety controller保護的機器之前，
請仔細閱讀本章
。2.1專業人員UE410柔性模塊化安全控制器必須由專業人員安裝、調試和維護。專業人員是指……已經接受了適當?shù)募夹g(shù)培訓，并接受了負責機器操作的機器操作員的指導，以及當前有效的安全指南和指令，能夠使用UE410 flexi和特定模塊的操作說明，并且已經閱讀并熟悉了與安全控制器相連的保護裝置（如C4000）的操作說明，并已閱讀并熟悉。
2.2設備的應用UE410靈活模塊化安全控制器是一個可配置的安全應用控制系統。符合EN 954-1的控制類別或符合EN 61508的SIL取決于外部電路、接線的實現、傳感器的選擇及其在機器上的位置。根據EN 954-1，該裝置對應的控制類別為
4；根據IEC 61508，應用可達到SIL3。根據EN 60204-1，裝置中的緊急停止功能對應于停止類別0或1。
注意警告！當將安全輸出（q1.q4）單獨連接到啟用輸入（en）或UE410-2ro/UE410-4ro時，根據EN 954-1，只能達到控制類別
3。為了達到符合IEC 61508標準的SIL3安全等級（見第99頁第12章“技術數據”），
必須至少每365天進行一次以下測試：【陰】必須關閉UE410柔性系統電源?！娟帯勘仨毚蜷_UE410柔性系統電源。【必須驗證連接安全傳感器的所有安全功能】必須根據要實現的控制類別選擇安全傳感器的類型和接線方法。
his chapter deals with your own safety and the safety of the equipment operators. Please read this chapter carefully before working with the UE410 Flexi modular safety controller or with the machine protected by the UE410 Flexi modular safety controller. 2.1 Specialist personnel The UE410 Flexi modular safety controller must be mounted, commissioned and serviced only by specialist personnel. Specialist personnel are defined as persons who ... have undergone the appropriate technical training and who have been instructed by the responsible machine operator in the operation of the machine and the current valid safety guidelines and have access to the operating instructions of the UE410 Flexi and those of the particular modules and have read and familiarised themselves with them and have access to the operating instructions for the protective devices (e.g. C4000) connected to the safety controller and have read and familiarised themselves with them. 2.2 Applications of the device The UE410 Flexi modular safety controller is a configurable control system for safety applications. The control category in accordance with EN 954-1 or the SIL in accordance with EN 61508 depends on the external circuit, the realisation of the wiring, the choice of the sensors and their location at the machine. The device corresponds to up to control category 4 in accordance with EN 954-1; applications can reach up to SIL3 in accordance with IEC 61508. The emergency stop function in the device corresponds to stop category 0 or 1 in accordance with EN 60204-1. ATTENTION Warning! When wiring safety outputs (Q1Q4) individually to an ENABLE Input (EN) or to a UE410-2RO/UE410-4RO it is only possible to reach up to control category 3 in accordance with EN 954-1. In order to reach the SIL3 safety level (see Chapter 12 “Technical data“ on Page 99) in accordance with IEC 61508 the following test must be made at least every 365 days: The UE410 Flexi system must be powered down The UE410 Flexi system must be powered up All safety functions of the connected safety sensors must be verified The type of safety sensors as well as the method of wiring must be chosen according to he control category which is to be achieved
上海律立貿易有限公司（m.598m.cn）主要銷售：SMC電磁閥,SMC氣缸, FESTO氣缸，F(xiàn)ESTO電磁閥，圖爾克TURCK傳感器，SICK,傳感器，邦納傳感器，歡迎您的來電！
上海律立貿易有限公司（m.598m.cn）主要銷售：SMC電磁閥,SMC氣缸, FESTO氣缸，F(xiàn)ESTO電磁閥，圖爾克TURCK傳感器，SICK,傳感器，邦納傳感器，歡迎您的來電！
- 上一篇：邦納傳感器BANNER傳感器設備的基本組產品規格 2019/1/2
- 下一篇：圖爾克TURCK傳感器接近開關的方框圖和工作原理 2019/1/2